The Sensiron SHT/SHW is fully calibrated and provide a digital and analog output with an advance series of digital humidity and temperature sensor design for long term stability and high end applications such as mobile, navigation system, environmental, automotive, industrial and home automations.
The SHT3X
The SHT3X is a newly launch next generation of temperature and humidity sensor from Sensirions, designed in a new CMOSense core. The SHT3X has added a new intelligence platform for reliability and improved the sensing accuracy specification compared to its predecessor. The functionality includes enhance signal processing, 2 distinctive and user selectable i2C address with the communication speed of up to 1 MHz. This device driven on 2.4v to 5.5v guarantees compatibility on a assembly situations. For more reading and address selection please refer to the datasheet below.
The SHTCX
The SHTC1 is designed to overcome the limit of size, power consumption, and performance. The Sensirions’s CMOSense technology offers a complete sensor system on a single chip consisting of a capacitive humidity sensor, a bandgap temperature sensor, analog and digital signal processing A/D converter, calibration data memory and a digital communication interface that communicate with fast mode i2C protocol. This sensor convers humidity measurement range of 0 to 100% RH and a temperature measurement’s range of -30 degree Celsius to 100 degree Celsius with accuracy of +- 0.3 degree Celsius. This device is runs on 1.8v and energy budget below 1 μJ per measurement make that make this device suitable for mobile or wireless applications running on a tightest power consumption. . For more reading please refer to the datasheet below.
The SHWTX
This device is flip chip package digital humidity and temperature sensor. This type of package is ultra-small sensor which are suitable for application with the tightest space constraints with impressive pure simplicity. This sensor is based on Sensirion’s CMOSense technology that offers a complete system on a single chip consisting a capacitive humidity sensor, bandgap temperature sensor, analog and digital signal processing, Analog to Digital converter, calibration data memory and i2c data communication protocol interface at fast mode. For more reading please refer to the datasheet below.
Required Component
- Python 2.7 | Python 3.6
- MicroPython, Raspberry Pi, Intel Joulo, Pico I, Intel Edison, ESP32, Pycom (Flashing ESP8266/ESP32 Please refer to this link) /(please refer to each MCU’s respective pin-outs & bus configurations)
- SHT3X, SHTCX, SHWTX Temperature Sensor
- Capacitors (See below required values)
- Resistors (See below required values)
- Simulator / PCB Designer (Circuit simulation to PCB Layout)
Wiring Guide
Python Source Code
[crayon-6767dd15c30a0202115364/]
Downloads
- Download SHWT Datasheet
- Download SHTX Datasheet
- Download SHT3X Datasheet
- Download SHT Python Code Library
