This is another illustration how to wire the Analog Led Strip using PWM on Microcontroller together with Bluetooth module and your Android smart phone. As your can see the diagram below we are using MOSFET to drive higher voltage pointed to RGB LED Strip. MOSFET metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a type of field-effect transistor (FET). It has an insulated gate, whose voltage determines the conductivity of the device. This ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals. For customizing the settings of your Bluetooth HC06 using AT Command please refer to this link.
Required Component
- Arduino Microcontroller, Teensy, ATMEGA328P on (USB to TTL), ATMEGA32U4
- Bluetooth HC06 Module
- MOSFET (N-Channel)
- 3014/3020/2835/5050/ Analog LED Strip
- 12v Power Adapter
- 5v Regulator(Optional)
- Jumper Wires / DuPont Wires
- Solder Less Bread Board
Wiring Guide
Android App.
https://play.google.com/store/apps/details?id=com.a14core.rgbselector
Source Code
[crayon-67676e989c90b353496404/]
