The DRV8880 is a 2A stepper motor driver with integrated auto tune, support STEP/DIR interface up to 1~16 micro stepping indexer that runs on 6.5 to 45v range. These device can be use in Automatic Teller, Money Handling Machine, Security
Wiring TI DRV8833 H-Bridge DC/Stepper Motor Driver
The DRV8833 is almost similar to DRV8871 it has also H-Bridge current control motor driver and also can drive a DC Motors and 1 Stepper Motor, solenoids, or other inductive loads. The difference between DRV8833 and DRV8871 is pin configuration
Wiring the DRV2605 Haptic Driver for LRA and ERM in I2C/IIC
This is the DRV2605L Haptic Driver for LRA (Linear Resonant Actuator) and ERM (Eccentric Rotating Mass) with effect library and smart loop architecture. This device is licensed version of TouchSense 2200 software from Immersion which eradicates the need to design
Wiring The SF11X Laser Altimeter / Rangefinder / Accurate Distances Measuring on Microcontroller
This is the lightweight laser altimeter SF11C developed and design by LightWave Optoelectronics,. This devices is ideal for UAV’s, (Unmanned Autonomous Vehicles) it can also serve as highly effective rangefinder in variety of application. TOF (Time of flight) system makes
Wiring the VL53L0X ToF Accurate Laser Ranging / Distance Measuring Sensor on Microcontroller
This is the VL53LOX breakout module a type of ToF (Time-of-Flight) laser ranging sensor in smallest package capable of delivering accurate distance measurements whatever the object reflectance compared to conventional measuring sensor, the VL53LOX can measure a distance up to
14CORE Obstacle Avoidance Bot with HC-SR04, L293D Shield, SERVO & Arduino Microcontroller
This is the 14core design Obstacle Avoidance BOT with L293D Shield and HC-SR04 and Servo, which is capable of avoiding obstacles using an Ultrasonic Ranging Sensor. The HC-SR04 is economical sensor provides 2cm to 400cm of non-contact measurement functionality with
14CORE Line Following BOT with TCRT5000/L298N on Microcontroller
This is the 14CORE Design Line Following robot which is capable of detecting lines and follow it. This robot uses TCRT5000 Sensor which is capable of emitting dark color lines. The TCRT5000 are reflective sensors which include an infrared emitter
14CORE Light Tracking/Finder BOT on L298N / L293D with Microcontroller
ÞThis is the 14CORE Design light finder robot which is capable of detecting, finding and following light source path. This robot uses LDR (Photodiodes) to detect light from the surroundings and follow where the light source. As you can see
Wiring RFLink 433MHz Remote Controlled Rover Robot
Yet another illustration, this illustration demonstrates making a remote controlled rover robot base on 433MHz RF Link radio module, Joystick and with L298n and l293d H-Bridge motor controller you can choose which suit to use for the motor controller. As
Wiring the Obstacle Avoidance Sensor Module Board
Another illustration that very useful building an obstacle bot or a project that used obstacle avoidance. This module allows for sensing of solid objects within a fixed range it is actually an adjustable with on-board potentiometer. This guide is guide
Wiring MOSFET module board on Higher Loads with Motor
In this illustration we will going to wire the IRF520 MOSFET (Metal Oxide Semiconductor Field-effect Transistor) Module Board a simple breakout board for driving higher loads. MOSFET enables you to control higher voltage projects on microcontroller. MOSFET is also kind