H3LIS200DL is a MEMS (Micro Electro Mechanical System) motion sensor manufactured by STMicroelectronics. It is designed to measure linear acceleration in three dimensions (X, Y, and Z axes) and can detect acceleration changes as small as 1mg (milli-g, where 1g
Wiring the Analog Devices ADuM1250/ADuM1251 Swappable Dual i2C Isolator with LTC2946
This is ADuM1250 is a digital isolator product manufactured by Analog Devices. It uses a technology called iCoupler to provide electrical isolation between the input and output side of the device, while preserving the digital signal. The ADuM1250 can be
Wiring LM393 as Steam, Water Vapor, Moisture Sensor
This is a steam sensor which is can sense a rain drops, steam or water vapor suitable of IOT project. The illustration below use LM3XX as differential comparators that drives the difference between the two inputs. The LM3XX device is
Wiring Flex Sensor with Multiple Servos on Microcontroller
This is the Flexible Sensor/ Flex Sensor. This sensor works on resistance across the sensor when the sensor bend the resistance of the sensor increase the same characteristics on potentiometer / variable resistors. This sensor works on 5v it read
Wiring Xtrinsic MAG3110 3-AXIS Digital Magnetometer on Microcontroller
This is a Freescale’s three axis, digital magnetometer MAG3110 is a low-power to adopt & reads an orientation an independent electronic compass that can be provide accurate heading information. It uses 400 kHz fast mode i2C serial interface output and
Wiring the ML8511 Ultra Violet Light Sensor on Microcontroller
This is the ML8511 Ultra Violate Light Sensor, which is suitable for acquiring UV intensity indoor or outdoor. The ML8511 equipped with internal amplifier which converts photo-current to voltage depending on UV intensity, and offers you an easy interface to
Wiring the APDS 9930 Ambient Light Sense / APDS 9960 RGB Gesture Sensor with Microcontroller
This is the touch-less gestures sensor a HMI (Human Machine Interface) by swiping your hand over the sensor, which controls a computer, microcontroller, robots or home, automotive, industrial gesture switching or ambient light and color measuring and proximity detections. The
Wiring the IR Flame Detection Sensor with SBC Single Board Computer
This is the Flame detection sensor its detect 60 degree angle spectral sensitivity of 720-1100nm. The spectral sensitivity of this sensor is optimized to detect emissions from naked flames. The output signal DO is pulled on a high state (active
Wiring the 314X Hall Effect Sensor Module
In this illustration we will going to wire the 3144 Hall Effect Sensor Module. Hall Effect Sensor are designed to respond in a wide range of positive or negative magnetic field. Linear Sensor are critical to the performance to their