The I2C/TWI Communication shield module is mainly use and made for nRF24l01 transceiver module, dedicated to provide a reliable performance and to reduce the possibility of data lost in the communication process there are three stages to process a communicate
Starters #20 Wiring the I2C DS1307 Real Time Clock on Arduino
This tutorial we will going to wire the DS1307 Module with on Chip I2C. which is output the real time clock signal through standard I2C interface. The DS1307 Serial Real Time Clock is a low power, full BCD (binary-coded decimal)
How to use I2C Bus Interface in Arduino with Sample Code
Using I2C (I square C) in Arduino interface , I2C is a standard for connection MCU and peripherals together. I2C is sometimes referred to as 2 wire interface or TWI. All the Arduino board have at least 1 I2c socket
The 14CORE – Industrial / Automotive Class Vibration Shock Sensor with TE MODEL 3038
This is the TE 3038, TE 3038 is a type of MEMS (Micro-Electro-Mechanical System) accelerometer that is designed to measure acceleration and tilt. It uses a microelectromechanical system (MEMS) to detect changes in acceleration and converts this into an electrical
14CORE USB TYPE-C CH330N – Switchable 5v or 3.3v USB-TYPE C to Serial Converter
A USB-to-serial converter is a device that allows a computer or other USB-enabled device to communicate with a serial device, such as a microcontroller, PLC, or scientific instrument, over a USB connection. The converter essentially translates the USB data sent
14CORE ATMEGA32U4 MINI G2 2023 an 8Bit Microcontroller with 32k Bytes of ISP Flash and Integrated USB Controller
ATmega32U4 and ATmega16U4 are both MCU from Atmel Corporation (now a part of Microchip Technology), which are based on the AVR architecture. They are similar in many ways, but there are some distinctions between the two. The ATmega32U4 is an
14CORE STM8S001 G2 Re-Version 2023 an 8Bit Minimal Microcontroller with JTAG/ST-LINK Pins
STM8S001 is a microcontroller from STMicroelectronics, which is a member of the STM8S family of 8-bit microcontrollers. This microcontroller is based on a high-performance 8-bit STM8 core with Harvard architecture, which enables it to deliver efficient performance and high code
Wiring MCP73831 + MAX17048 Single-Cell Fully Integrated Li-Ion / Li-Po Charge Management Controller with Fuel Gauge
This project will be going to wire several components, the MCP73831 and MAX17048 including your preferred microcontroller and your monitoring display such as OLED or LCD to see the reading output of the MAX17048. for demonstration purposes, we will use
Wiring H3LIS200DL 3-AXIS / Drop Sensing / Shock detection/ Impact recognition / Angle Sensor / MEMS Motion Detection Sensor
H3LIS200DL is a MEMS (Micro Electro Mechanical System) motion sensor manufactured by STMicroelectronics. It is designed to measure linear acceleration in three dimensions (X, Y, and Z axes) and can detect acceleration changes as small as 1mg (milli-g, where 1g
Wiring the Analog Devices ADuM340E / ADuM341E / ADuM342E Quad SPI – Isolator with BOSCH BME280 Sensor
The Analog Devices ADuM340E / ADuM341E / ADuM342E is an isolated high-speed, voltage-mode, single-channel digital isolator based on Analog Devices, Inc., iCoupler® technology. It uses an integrated transformer to provide galvanic isolation of up to 2500V RMS for 2 seconds.
Wiring the AMS AS5600 Contactless 12-Bit Programmable Potentiometer / Magnetic Encoder
AS5600 is a 12-bit high-resolution programmable contactless magnetic rotary position sensor, this sensor can be used as a magnetically driven potentiometer or magnetic encoder. however, compared to a traditional potentiometer or an encoder the AS5600 has significant advantages. AS5600 is
Wiring the ST LPS25HB / LPS331AP Pressure, Barometer MEMS Sensor
This is the LPS25HB release by STMicroelectronics. The LPS25HB is an absolute pressure sensor with a feature that functions as a digital output barometer that rages from 260 mbar to 1260 mbar 26 kPa to 126 kPa with absolute accuracy