This is the PocketBeagle USB Key Fob mini Computer match to Raspberry Pi Zero. PocketBeagle is an ultra-tiny open-source development board runs Linux operating system with dependability. The PocketBeagle driven by Octavo System OSD3358-SM a system-in-package that includes 512MB DDR3
Wiring the MCP2515 Shield with OBD on Arduino
In this illustration we will going to wire the CAN BUS (Controller Area Network Bus) Shield with Arduino, if you don’t have any background how CAN (Controller Area Network Bus) works please refer this this link. As you can see
14CORE POE (Power Over Ethernet) to USB-A 5V Power Hub / Server Rack Mountable for RPI/ESP8266/ESP32
POE or Power Over Ethernet is a technology that lets electrical power to be transmitted along with data over standard Ethernet cables. This eliminates the need for separate power cables and power supplies for networked devices, making it a convenient
Wiring MCP73831 + MAX17048 Single-Cell Fully Integrated Li-Ion / Li-Po Charge Management Controller with Fuel Gauge
This project will be going to wire several components, the MCP73831 and MAX17048 including your preferred microcontroller and your monitoring display such as OLED or LCD to see the reading output of the MAX17048. for demonstration purposes, we will use
Wiring H3LIS200DL 3-AXIS / Drop Sensing / Shock detection/ Impact recognition / Angle Sensor / MEMS Motion Detection Sensor
H3LIS200DL is a MEMS (Micro Electro Mechanical System) motion sensor manufactured by STMicroelectronics. It is designed to measure linear acceleration in three dimensions (X, Y, and Z axes) and can detect acceleration changes as small as 1mg (milli-g, where 1g
Wiring the Analog Devices ADuM1250/ADuM1251 Swappable Dual i2C Isolator with LTC2946
This is ADuM1250 is a digital isolator product manufactured by Analog Devices. It uses a technology called iCoupler to provide electrical isolation between the input and output side of the device, while preserving the digital signal. The ADuM1250 can be
Wiring the Analog Devices ADuM340E / ADuM341E / ADuM342E Quad SPI – Isolator with BOSCH BME280 Sensor
The Analog Devices ADuM340E / ADuM341E / ADuM342E is an isolated high-speed, voltage-mode, single-channel digital isolator based on Analog Devices, Inc., iCoupler® technology. It uses an integrated transformer to provide galvanic isolation of up to 2500V RMS for 2 seconds.
Wiring the AMS AS5600 Contactless 12-Bit Programmable Potentiometer / Magnetic Encoder
AS5600 is a 12-bit high-resolution programmable contactless magnetic rotary position sensor, this sensor can be used as a magnetically driven potentiometer or magnetic encoder. however, compared to a traditional potentiometer or an encoder the AS5600 has significant advantages. AS5600 is
Wiring the ACS711 ±25A, ±31A, ±12A, ±15A Hall Effect Linear Current Sensor with ESP32
This is the Allegros ±25A, ±31A, ±12A, ±15A ACS711 Hall effect-based linear current sensor an integrated overcurrent fault output, which provides you a low-resistance ~ 1.2mΩ current route including electrical isolation reach to 100 volts. This model receives a bidirectional
Wiring the ST LPS25HB / LPS331AP Pressure, Barometer MEMS Sensor
This is the LPS25HB release by STMicroelectronics. The LPS25HB is an absolute pressure sensor with a feature that functions as a digital output barometer that rages from 260 mbar to 1260 mbar 26 kPa to 126 kPa with absolute accuracy
Wiring the ST’s VL6180X Proximity & Ambient Light Sensor w/d RPI (PICO)
This is the ST”s Single Package VL6180X Proximity and Ambient Light Sensor that measures a range to a target object distance up to 20-centimeter or 60-centimeter range by reducing the resolution. The VL61850X uses TIME-TO-FLIGHT measurements with the use of
Wiring the 16-BIT ADT7410 High Accuracy Digital i2C Temperature Sensor
This is another sensor that works and runs on the i2C protocol produced and developed by Analog Devices Semiconductor, Analog Devices are known for their reliable and well-documented sensor chip and their primary electronics components. The Analog Devices ADT7410 is