The DRV8880 is a 2A stepper motor driver with integrated auto tune, support STEP/DIR interface up to 1~16 micro stepping indexer that runs on 6.5 to 45v range. These device can be use in Automatic Teller, Money Handling Machine, Security
Wiring TI DRV8833 H-Bridge DC/Stepper Motor Driver
The DRV8833 is almost similar to DRV8871 it has also H-Bridge current control motor driver and also can drive a DC Motors and 1 Stepper Motor, solenoids, or other inductive loads. The difference between DRV8833 and DRV8871 is pin configuration
Wiring TI DRV8871 Brushed Motor Driver with PWM Sense
The Texas Instruments DRV8871 is a 3.6A brushed DC motor driver with internal current sense / pulse with modulation control. This device is suitable use for printers, industrial equipment’s, mechatronics, appliances, etc. This device as 2 logic input to control
Wiring LuminOx O2 / Oxygen RS232 Optical Sensor
This is the LuminOx O2 (Oxygen) RS232 TTL driven sensor a high accuracy fluorescence based optical sensor series, design and develop by SST sensing. This device is capable of detecting and measuring ambient oxygen partial pressure PP02 level using the
Flashing microPython on ESP8266, 32, 32S, VRover, WRooM
microPython is efficient programming language base to Python 3 its includes a small subset of Python standard library and optimized to runs on microcontroller and contained environments, popular in many micro controllers such as Teensy, ESP8266, ESP32, pyCom, micro:bit, pyBoard,
MAXREFDES131# MAXIM Integrated Grid-Eye IR Array Sensor
This is the MAXREFDES131 an IR array sensing device solution module. This device is mainly driven by 2 components onboard, the Panasonic AMG8833 Grid-Eye and Maxim (DS28E17) a 1 wire-to-i2c master bridge and a dual channel addressable switch along with
TEMT6000 Visible Spectrum / Ambient Light Sensor
This is the TEMT6000 an Ambient Light Sensor which is sensitive to the visible spectrum. Capable of sensing a light brightness around you. The TEMT 6000 is a silicon NPN epitaxial phototransistor in a miniature transparent mold for surface mounting
MS5803-01BA i2C Pressure / Temperature Variometer Sensor
This is MEMS MS5803-01BA this device is a new generation of high resolution altimeter sensor which is integrated with serial peripheral interface (SPI) and i2C (two wire interface) bus interface. The MS5803-01BA-HE is a high endurance pad compare to MS580301BA
Wiring the SPI Electronic Ink / Electronic Paper Display Panel
This is the E-Ink / Paper display device integrated by the image display technology of Microencapsulated Electrophoretic Display (MED). This device has an approach to create a tiny spheres in which the charge color pigments are suspending the transparent electrode
Guide Wiring the 0.95 inch 96×64 RGB OLED Display Module
This is the 0.95 inch 96X64 RGB 65K OLED Display module, driven by SSD1331 via SPI2 Interface distributed by Waveshare. These device is mainly runs on SSD1331 a single chip CMOS OLED/PLED driver at 288 segment and 64 common output
Wiring the SPI 172×72 Gray Shade Electronic Ink (E-INK) Module
This is the E-Ink display module designed for ink display development. This module can work without additional electronic parts you just plug the module directly to your microcontroller. This device has driven by SSD1606 4GS active matrix display driver selectable
Wiring the DRV2605 Haptic Driver for LRA and ERM in I2C/IIC
This is the DRV2605L Haptic Driver for LRA (Linear Resonant Actuator) and ERM (Eccentric Rotating Mass) with effect library and smart loop architecture. This device is licensed version of TouchSense 2200 software from Immersion which eradicates the need to design