Another project that demonstrate how to wire the ESP82366 Module and 16×2 i2C LCD as a network monitoring device to observe the network web/app server communication and can handle many host depend on your requirements. ESP8266 is a WiFi full
Wiring & Programming ESP8266 12/12E / NodeMCU as WiFi Remote Client/Server Mode
Another illustration how to wire the ESP8266 as server and client mode, therefore there is no need to use a router or smart phones to interact/communicate to the ESP8266, this is direct communication between 2 ESP module as server and
Programming / Flashing Latest Firmware on ESP8266 NodeMCU DevKit with Mac OSX
NodeMCU devkit can be flashed with latest firmware using your MAC OS, before you going to start you need to disable the OSX “KEXT SIGNING “ feature. Apple OSX introduce the system integrity protection that disabled the modification system location
Wiring Thermocouple MAX6675 on ESP8266 12E NodeMCU
In this illustration we will going to wire a Thermocouple, i2C OLED Screen and ESP8266 NodeMCU Board, as you can see the source code it is using a C Sketch code not a LUA script, if you don’t have ESP8266
Wiring NodeMCU ESP8266 12E with i2C 16×2 LCD Screen
Another illustration that demonstrate how to wire the i2c 16×2 LCD on ESP8266 12 Known as NodeMCU, as you can see the diagram below the SCL as Arduino Analog Pin A4 is connected to D1 on NodeMCU at the same
Wiring ESP8266 nodeMCU with HCSR04 Ultrasonic Sensor
In this illustration we will going to wire the ESP8266 12E nodeMCU with Ultrasonic Raging Sensor HCSR04. As you can see the illustration below the sensor trigger pin is connected to D1 which is pin 5 in Arduino Board, and
Installing NodeMCU driver on MAC
The NodeMCU is using USB 2 Serial Communication called CH340, you can download the driver at the link below, you have to install the driver package as you used the NodeMCU on Mac. After you install the CH340 driver you
How to Use NodeMCU Flasher Step By Step Tutorial
NodeMCU Flasher is a firmware programmer made for NodeMCU development kit, by using this program you program the ESP8266 board by send binary code directly to the NodeMCU Development Board. Before you can program the NodeMCU you need to set
What is NodeMCU How to Code LUA Script with a Simple Lines of Code
NodeMCU is an Open Source Firmware Development Board that helps you to build your IOT(Internet of Things) projects with a few LUA Script Lines, NodeMCU it is like Arduino Hardware with a Input Output built in the Board itself, it
Wiring the VISHAY VEML6030 High Accuracy Ambient Light Digital Sensor
VEML6030 is a superb high accuracy ambient light digital sensor with 16-bit resolutions in a miniature transparent 2mm x 2mm package that integrated a low noise amplifier, highly sensitive photodiode, 16-bit A/D converter and its supports i2C bus communication interface,
Wiring the Broadcom APDS 9253 001 Digital RGB IR Light Sensor
The APDS9253 001 is a digital RGB IR Flux Sensor, and an ambient light sensor that converts light intensity to a digital output signal, The APDS9253 sensor uses 4 individual channels of RGB (Red, Green, Blue and Infrared (RGB+IR) suitable
Wiring The TE-HTU21D Digital Humidity Sensor
HTU21D is a digital humidity sensor with temperature output that uses MEAS (Measurement Specialties), the chip has embedded in a reflow solderable Dual flat leads (DFN) package with a size of 3X3X0.9MM. The HTU21D provides a calibrated linearized signal in