This is the 0.95 inch 96X64 RGB 65K OLED Display module, driven by SSD1331 via SPI2 Interface distributed by Waveshare. These device is mainly runs on SSD1331 a single chip CMOS OLED/PLED driver at 288 segment and 64 common output
Wiring the 128×64 1.3 inch OLED Display on 4 Wire, 3 Wire, i2C Interface
This is the 1.3 inch OLED Display driven by SH1106 from Waveshare, 128×64 resolution, it has integrated 3 interface the 3 wire SPI, 4 wire SPI, and i2C for ease integration in your microcontroller. This OLED is mainly runs by
Wiring and Flashing ESP32-WROVER, ESP WROOM 32 with USB TTL UART and ESP32 Download Tool
ESP32 develop by ESPESSIF systems and some other development module and boards. The ESP32 WROOM 32 is a generic Wifi with Bluetooth, Bluetooth Low Energy Microcontroller module that provides a wide range of applications, from low-power networked sensors at the
Wiring The pH (Power of Hydrogen) Ion Concentration Sensor with BNC Electrode Probe
pH (Power of Hydrogen) is the (-) negative log of hydrogen ion concentration in a water based solution described by Danish Biochemist Soren Peter Laurits Sorensen late 1909. pH has it value of 0 (ACID) and 14 (BASIC) in a
Monitor your Networked Servers / Routers with ESP8266 / NodeMCU as Stand-alone Wirelessly
Another project that demonstrate how to wire the ESP82366 Module and 16×2 i2C LCD as a network monitoring device to observe the network web/app server communication and can handle many host depend on your requirements. ESP8266 is a WiFi full
Wiring the ESP8266 12/12E as NTP Network Time Protocol via UDP as Stand Alone
NTP (Network Time Protocol) is a clock protocol that synchronize between servers and computers system, attach to the data networks. NTP was designed by David Millis at the University of Delaware. NTP is envisioned to synchronize all participating computers of
Wiring & Programming ESP8266 12/12E / NodeMCU as WiFi Remote Client/Server Mode
Another illustration how to wire the ESP8266 as server and client mode, therefore there is no need to use a router or smart phones to interact/communicate to the ESP8266, this is direct communication between 2 ESP module as server and
Wiring the A7 / A6 / A6C / A2 / A20 GSM GPRS / GPS WIFI Quad Band 2G GSM Module Board
This is A7, A6C, and A6 is a GSM/GPRS/GPS Module that Supports GSM, GPRS, and GPS Quad-Band 850/900/1800/1900 MHz 2G GSM network worldwide with an SMS, GPRS Class 10 Data Service, and GPS feature and supports digital audio and analog
Wiring Flashing / Programming ESP-32 / ESP32S with USB – TTL / UART and Integration with Arduino IDE
ESP32S Wifi Bluetooth combo module is ultra performance that is high ultra low-power consumption Wi-Fi and Bluetooth wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S dual-core 448 KByte ROM | 520 KByte SRAM | 16 KByte SRAM in RTC |
Free Open Source SCADA (Supervisory Control and Data Acquisition) for your SBC / MCU
SCADA is a system software and hardware elements, allows industrial to control a process locally or remote locations in a real time data, directly interact with devices such sensors, valves, pumps, motors, and more through HMI (Human Machine Interface), Smart
Wiring ESP8266 12/12E with G1/2 Liquid / Water Flow Sensor on Wireless Monitoring
Another illustration on ESP8266 12/12E as smart metering using liquid/Water flow sensor. Water flow sensor is capable of measuring flows in pipes from 0.15 to 60 liters per minute, suitable for measuring water consumption or detecting pipe leakage and monitoring
Wiring MOC78XX, H206, GP1A57HRJ00F Opto-interrupter for Motor Speed, Direction, Detection Control
This is the photo interrupter also known as photogate, photodiode, or phototransistor. Phototransistors are specially designed transistors with the base region exposed these transistors are light sensitive, especially when an infrared source of light is being used. Phototransistors it has