The Analog Devices ADuM340E / ADuM341E / ADuM342E is an isolated high-speed, voltage-mode, single-channel digital isolator based on Analog Devices, Inc., iCoupler® technology. It uses an integrated transformer to provide galvanic isolation of up to 2500V RMS for 2 seconds.
Wiring the ST’s VL6180X Proximity & Ambient Light Sensor w/d RPI (PICO)
This is the ST”s Single Package VL6180X Proximity and Ambient Light Sensor that measures a range to a target object distance up to 20-centimeter or 60-centimeter range by reducing the resolution. The VL61850X uses TIME-TO-FLIGHT measurements with the use of
How to Calibrate an Analog Type Sensor & Finding The Operating Min/Max Range
Analog sensors are run by measuring a physical object, chemicals, pressure, temperature, weight, etc. This device works by converting analog voltage and converted to digital signals that your computer or microcontroller can understand. Many sensors have a respective formula that
Wiring XL-MAXSONAR EZ Series A High Resolution Sonar / Ultrasonic Ranging Finder Sensor
The XL-MaxSonar – EZ Series are high-performance industrial grade sonar ranging sensor, excellent sensitivity with a high side object rejection, can be use as short to long distance detection ranging. This module has a various output options, that supports PWM,
Wiring the VL53L1X Long-Range Proximity Sensor
The VL53L1X sensor is a long-range proximity and ranging sensing that base on TOF (Time-of-Flight) unlike IR (Infrared) sensor which measure only signal strength and can be affected by the object reflectivity, compare to VL53L1X its measures directly to a
Wiring the SENSIRION SDP31, SDP32, SDP36, SDP37 Pressure Sensor with ATMEGA328TQFP
The SENSIRION SDP3X family sensors comes with deferential pressure range of (500Pa, 125Pa) on i2c and analog in a small package. suitable for high-volume applications where size is required on a design project. The SDP3X family ideal for measuring of
Wiring the BOSCH BME680 GAS Detection, Temperature / Humidity & Pressure Sensor
The BME 680 has a low power driver sensor, integrated gas detection, pressure, temperature & humidity sensor in a 4 in 1 extremely compact metal LGA package the most recent development from BOSCH SENSORTEC, the world’s leading manufacturer of MEMS
Wiring Si1133 i2C Ultraviolet / Ambient Light sensor
The Si1133 from Silicon Labs is an Ultraviolet & Ambient Light sensor is operated and controlled through registers accessible using i2c protocol / two wire interface to initiate on-demand UV or Ambient Light measurement. This sensor has integrated photo-elements array,
Wiring the VCNL4200 Infrared Proximity / Ambient Light Sensor
This is the VCNL4200 a highly sensitive long distance proximity IR and ambient light sensor (ALS) on i2C designed by VISHAY SEMICONDUCTORS. This device is pack into package that combined IRED and ALS Photodiodes, amplifiers, and analog to digital converting
Wiring Sensirion i2C Air Flow Digital Differential Pressure Sensor
This is the SDP (Sensirion Differential Sensor) a series of digital differential pressure sensors suitable for high volume applications. This sensor measure the pressure of air and non-aggressive gases with advance accuracy and no offset drift. This series of sensors
Water/Liquid Level Data Logging on microSD and RTC
Another project that demonstrate how to build a low cost lake/pond water level logger sensor that can be deployed without an RF communication. however this project works as independent/standalone can be deployed on a remote area intended for science and
Motion Data Logging with RTC / PIR as Stand Alone
This project is intended for implementing a low cost proximity/motion data logger, useful device that can be used on environmental / animal scientific research for school/university studies. However the goal of this project is to build an open source that