This is the GRID EYE an IR array sensor in a thermopile type infrared sensor develop by Panasonic which detects the amount of infrared rays. This high precision sensor is based on advanced MEMS Microelectromechanical systems) a package on a
Wiring Flex Sensor with Multiple Servos on Microcontroller
This is the Flexible Sensor/ Flex Sensor. This sensor works on resistance across the sensor when the sensor bend the resistance of the sensor increase the same characteristics on potentiometer / variable resistors. This sensor works on 5v it read
Wiring the VL53L0X ToF Accurate Laser Ranging / Distance Measuring Sensor on Microcontroller
This is the VL53LOX breakout module a type of ToF (Time-of-Flight) laser ranging sensor in smallest package capable of delivering accurate distance measurements whatever the object reflectance compared to conventional measuring sensor, the VL53LOX can measure a distance up to
Wiring the RCWL0516 Auto Induction Doppler Microwave Radar with ESP8266/32/Arduino
This is RCWL-0516 high sensitivity Automatic Induction Doppler Microwave Radar sensor that can be easily used in conjunction with your favorite microcontroller, single board computers or as standalone detection sensor. The RCWL module it has two parts the microwave frequency
Wiring the Diffused Reflection Laser Sensor with Microcontroller
This is a diffused reflection laser sensor that has an integrated IR transmitter and a receiver. This sensor using light that transmit by the Laser and receive by the Infrared since the laser adopts modulation processing technology, the receiving tube
Wiring The LIDAR (Light Detection and Ranging Sensor) Remote Sensing with Micro-controller
This is another illustration that demonstrate how to wire the LIDAR Sensor on your Microcontroller. LIDAR (Light Detection and Ranging) is a remote sensing device which is capable capture geographical information. LIDAR data is often collected by the survey of
Wiring the ITG3200 / ADXL345 / HMC5883L 9DOF RAZOR IMU AHRH UART SPI i2C Communication
This is the 9DOF (Degrees Of Freedom) IMU (Inertial Measurement Unit) module that has 3 integrated sensor in one module board the ITG-3200 (Triple Axis Digital Output Gyroscope), ADXL345 (13bit Resolution ±16g Triple Axis Accelerometer), HMC5883L (Triple Axis, Digital Magnetometer)
Wiring the PCF8591 Digital to Analog Conversion with Microcontroller
This is the PCF8591 a single chip single supply, low power 8bit CMOS data acquisition device with four analog inputs. 1 analog output and i2c Serial communication bus interface that allows the connection to be connected in series integrated bus
Wiring the APDS 9930 Ambient Light Sense / APDS 9960 RGB Gesture Sensor with Microcontroller
This is the touch-less gestures sensor a HMI (Human Machine Interface) by swiping your hand over the sensor, which controls a computer, microcontroller, robots or home, automotive, industrial gesture switching or ambient light and color measuring and proximity detections. The
Wiring MPU 6050 MEMS Accelerometer GYRO on RPI
Another illustration that demonstrate how to use MPU6050 on Raspberry Pi. The MPU 6050 sensor board contains a MEMS ACCELEROMETER and MEMS GYRO a single chip that provide a very accurate data, as it contains 16bits analog to digital conversion
Wiring The Vibration Tilt Switch / Ball Tilt Switch with RPI
Another illustration how to control and wire the Rolling Ball Tilt Switch or Ball Sensor along with Raspberry Pi. Ball tilt switch allows you to detect an location or inclination they are small and easy to wired-up it use low
Wiring the MPU9250 9 AXIS Motion Tracking Micro Electro Mechanical System
The MPU925 is a motion tracking device or MEMS (Micro Electro Mechanical System). A SIP (System in a Package) combining two components the MPU6500 & AK8963. The MPU6500 which is contains 3 axis gyroscope, 3 axis accelerometer, and onboard digital