This is essentially common named the monster shield that replace the popular l298n H-Bridge motor driver with a pair of VNH2SP30 a full bridge motor driver, this board is capable of driving a pair of high current motors. The VIN
Wiring RFLink 433MHz Remote Controlled Rover Robot
Yet another illustration, this illustration demonstrates making a remote controlled rover robot base on 433MHz RF Link radio module, Joystick and with L298n and l293d H-Bridge motor controller you can choose which suit to use for the motor controller. As
Wiring the MCP2515 Shield with OBD on Arduino
In this illustration we will going to wire the CAN BUS (Controller Area Network Bus) Shield with Arduino, if you don’t have any background how CAN (Controller Area Network Bus) works please refer this this link. As you can see
Wiring the MCP2515 Controller Area Network CAN BUS Diagnostics
In this illustration we will going to wire the MCP2515 CAN BUS Breakout Module, MCP2515 is a standalone controller area network or CAN manufactured by Microchip semiconductor, that implements the CAN specification version 2.0B it is capable of transmitting and
Using Arduino PWM Pulse with Modulation
The PWM or Pulse width Modulation can be used on the Arduino is several ways. In this guide explain how PWM work and techniques, as well as how to use the PWM registers directly to the Arduino board and control
Wiring the Rotary Encoder with Arduino
In this illustration we will going to test and wire the rotary encoder. Rotary encoder can be counted in the positive direction and the reverse direction during the rotation of the output pulse frequency and the rotation is continuous. Compare
Wiring the solenoid with TIP120 Transistor To Higher Load
In this illustration we will going to drive the solenoid with the input voltage of 12v to 24v using TIP120 Transistor. Because Arduino can only support power output of 3.3 and 5v this is not enough to work with the
Wiring MOSFET module board on Higher Loads with Motor
In this illustration we will going to wire the IRF520 MOSFET (Metal Oxide Semiconductor Field-effect Transistor) Module Board a simple breakout board for driving higher loads. MOSFET enables you to control higher voltage projects on microcontroller. MOSFET is also kind
RFID RC522 Gate Access Control with Arduino
In this illustration we will going to wire the RFID (Radio Frequency Identification) Module RC522 in this module it uses a radio signals and a Radio Label Tags for reading and writing data. How RFID works please refer to this
Wiring 8 Channel Optocoupler Relay Module
In this tutorial we will going to wire the 8 channel Relay Module driven by our own very owned microcontroller, the below illustration illustrate 8 device on external power source triggered by the relay. The 8 channel relay module has
Wiring L293D UNO/MEGA Shield with Stepper Motor
The L293D is a dedicated module to fit in Arduino UNO R3 Board, and Arduino MEGA, It is actually a motor driver shield that has full featured Arduino Shield can be used to drive 2 to 6 DC motor and
Controlling the L293D UNO/MEGA Shield with DC Motors
The L293D is a dedicated module to fit in Arduino UNO R3 Board, and Arduino MEGA, It is actually a motor driver shield that has full featured Arduino Shield can be used to drive 2 to 6 DC motor and