An 8-bit microcontroller is a type of microcontroller that has an 8-bit central processing unit (CPU). It is a compact integrated circuit that contains all the components needed to control electronic systems or devices. The 8-bit architecture refers to the
Wiring the Broadcom APDS 9253 001 Digital RGB IR Light Sensor
The APDS9253 001 is a digital RGB IR Flux Sensor, and an ambient light sensor that converts light intensity to a digital output signal, The APDS9253 sensor uses 4 individual channels of RGB (Red, Green, Blue and Infrared (RGB+IR) suitable
HELTEC WiFi32 / WiFi 8 integration with Arduino IDE
HELTEC WIFI 32 module is an ultra-performance that is high ultra-low-power consumption Wi-Fi and Bluetooth wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S dual-core 448 KByte ROM | 520 KByte SRAM | 16 KByte SRAM in RTC | 802.11 b/g/n/e/I
Wiring the APOGEE SU-100 & SI1145 Radiation / UV Probe
This illustration is based on Pyranometer/Actinometer. Pyranometer is a device that measures the solar irradiance of a planar surface or to measure the solar radiation flux density from the hemisphere above within a wavelength range. To achieve this instrument we
Wiring the SFM3000 Mass Flow Meter with 16X2 LCD Screen
This is the SFM3000 a Mass Flow Meter develop by SENSIRION. This can measure a bidirectional flow of air and other non-aggressive gases at rate up to 200slm superb accuracy and extremely high speed output at 14 bit/ 2kHz rate.
Sensing Color with BH1745NUC 16bit i2C Color Sensor
The ROHM BH175NUC is a 16bit color sensor that can sense RED, GREEN and BLUE light and converts to a digital values. This device is highly sensitive to wide dynamic range illuminance of color at 0.005 ~ 40k LUX temperature
Wiring PCA9685 16-Channel/12Bit PWM i2C Bus Controller
This is the PCA9685 develop by XMP semiconductor. The PCA9685 is an i2C / TWI bus controller capable of driving 16 channels PWM controller. Suitable for driving servos and LED. Each LED output has its own 12-bit resolution at 4096
FLIR Lepton PureThermal I/O Thermal Imaging Module
This the FLIR Thermal camera breakout module can easily integrate to your SBC Single Board computer kit / BSP boards or Microcontroller evaluation boards that driven by ARM, STM, TI, NXP, ATMEL, etc. This device can be used in thermal
Wiring the SPI Electronic Ink / Electronic Paper Display Panel
This is the E-Ink / Paper display device integrated by the image display technology of Microencapsulated Electrophoretic Display (MED). This device has an approach to create a tiny spheres in which the charge color pigments are suspending the transparent electrode
Guide Wiring the 0.95 inch 96×64 RGB OLED Display Module
This is the 0.95 inch 96X64 RGB 65K OLED Display module, driven by SSD1331 via SPI2 Interface distributed by Waveshare. These device is mainly runs on SSD1331 a single chip CMOS OLED/PLED driver at 288 segment and 64 common output
Wiring the SPI 172×72 Gray Shade Electronic Ink (E-INK) Module
This is the E-Ink display module designed for ink display development. This module can work without additional electronic parts you just plug the module directly to your microcontroller. This device has driven by SSD1606 4GS active matrix display driver selectable
Wiring the 128×64 1.3 inch OLED Display on 4 Wire, 3 Wire, i2C Interface
This is the 1.3 inch OLED Display driven by SH1106 from Waveshare, 128×64 resolution, it has integrated 3 interface the 3 wire SPI, 4 wire SPI, and i2C for ease integration in your microcontroller. This OLED is mainly runs by